THE ALL NEW NINJA32 ACRO by UBAD!!! EVERY FC WILL COME FLASHED WITH A STABLE RELEASE OF CLEANFLIGHT. (Due to constant updates, you may need to update)
Solder Service may delay shipment up to 24-hours.
NOW WITH 16Mbit SPI flash FOR BLACK BOX DATA RECORDING!!!
Boards are now WHITE... (Pic if for reference only)
At the heart of the Ninja32 is a 32bit ST micro work horse of a processor, with untapped memory and cpu power and a host of equally impressive sensors. The Ninja is also matched up with some of the nicest GUI programs and features to get the most out of your configuration.
This "Acro" version's only sensor is the MPU6050 acc + gyro. There is no pressure sensor or mag mounted.
- STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
- Invensense MPU6050 MEMS accelerometer + gyro
- Built-in Micro-USB for programming/firmware update
- 36x36mm size, ~5 gram weight w/o headers
These come with all needed headers (straight and right angle options), NOT soldered to the board. RC input breakout cable is included to allow connecting to 4channel+ receiver.
- 36x36 mm (30.5mm Mounting)
- 5.3 grams (no headers, 7.3 grams with)
- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6050)
- 16Mbit SPI Flash Memory
- Acro Ninja32 rev5
- 2x5 pin header
- 2x3 pin header (right angle), 2x3 pin header (straight)
- 3x6 pin header (right angle), 3x6 pin header (straight)
- 1x RC breakout cable
Configuration software - Pre-Flashed with Cleanflight Configurator - Need to Flash with v. 1.8+ to enable data recording.
Download User's Manual.
Here are the PIDS that we use on our Ninja32 Board and the Inversion:
Still the best F1 board
Posted by jp on Mar 9th 2017
Its a great board, I like the layout of the Ninja 32 (all accept the 3v pads, there to close IMO). And Bruce is pretty nice to sell the at 7$
Posted by Denny on Feb 7th 2017
Bought three, used two so far to replace problem fc's. They flash betaflight and work problem free so far. Can't ask for better!
It works great
Posted by Denny on Feb 4th 2017
I've tried other fc boards in the past. I've had all kinds of problems. These are reliably consistant fc's. I've had no trouble with them in the least. They are great performers, and work as advertised!
Posted by Unknown on Sep 9th 2016
Easy to set up.
Works perfect. Zero problems fast shipping
Posted by Lee fleming on Mar 2nd 2016
5 stars fast shipping, works great
Havent hooked up yet but heard great things...
Posted by Unknown on Feb 25th 2016
Quick and fast delivery
Customers also viewed