Loading... Please wait...

UBAD DMT VTX w/OLED Powered by Hawkeye

$44.99
SKU:
3001
Current Stock:
34
Quantity:

Below are the available bulk discount rates for each individual item when you purchase a certain amount

    Product Description

    UBAD DMT VTX w/OLED Powered by Hawkeye

    In another joint effort by UBAD, Shea Ivey, and Hawkeye, we bring you a tiny, feature rich, and reliable vTX that includes an OLED and Smart Audio (A TBS Protocol).

    No more difficult configuring via a cluttered GUI.  The in house designed and programmed OLED allows the display of essential information.

    Video Transmitter Features:

    • Size: length 36mm, width 36mm, height 5mm (hole spacing 30mm)
    • Status LEDs Indicates power and transmit
    • Large Cap Large capacitors for clean power.
    • Voltage - 7.4v-24v input voltage.
    • Weight  14.89 grams 25/200/400mw
    • Transmitter Designed around a custom vTX module only found on UBAD manufactured FPV Products.
    • Power Draw: TBDmah @ 25mw 5905                      
        • TBDmah @ 200mw 5905                       
        • TBDmah @ 400mw 5905
    • Values may very depending on frequency and temperature.
    • 40 Channel *40 channel range tested.
    • NTSC/PAL: Auto detected
    • Antenna Connector: SMA Pigtail

    For Smart Audio Support please visit: https://github.com/betaflight/betaflight/wiki/Unify-Smartaudio

     

    Product Reviews

    1. Crisp video

      Posted by Spyderman83 on Sep 4th 2017

      Very good video. Crispest I have seen. Very strait forward easy menus. Very nice piece with great support!

    2. Sehr Guter VTX mit OSD

      Posted by Unknown on Jan 16th 2017

      Super klein und leicht bringt ein min OLED Bildschirm mit . Hat ein eingebautes OSD was sehr gut und einfach gehalten ist.
      bin sehr begeistre.

    3. Great Product!

      Posted by Unknown on Jan 4th 2017

      This is a great little product. I have always been hesitant to run an OSD because I get by on the Taranis telemetry just fine, and (1) I didn't feel like adding an additional layer to my pre-existing flight control stack, (2) didn't feel like replacing my flight controller or pdb with an all in one board, and (3) I didn't care for the complexity of the typical OSD freeware. This OSD is easy to install, has a simple interface, won't increase the height of your stack, and the VTX works very well. If you are happy with your LaForge, you'll like this too.

    Click the button below to add the UBAD DMT VTX w/OLED Powered by Hawkeye to your wish list.