MiMiC-X Mini Video Transmitter w/ VAS MinION COMBO
VAS Video Aerial Systems 5.8GHz RHCP Minion Antenna (MMCX Connector)
After nearly a year on the market the Ion now has a little brother. The Minion is ready for its debut!
The Minion features a more compact size (half as large) and slightly reduced gain than the original Ion. Packing a gain of 2.25dbic, the Minion may be just slightly underpowered when compared to the Ion, but it still outperforms the competition in range and performance. Axial ratio does not suffer in the Minion either with a near perfect Axial ration like the Ion, you can expect the Minion to stop multipathing in its tracks. But there is more! The largest critique we heard after releasing the Ion was aimed at the Ion’s rather large nulls. Well we listened and worked diligently to close these nulls to more manageable sizes. With time and perseverance we were able to all but close the nulls. This is great news for pilots as now they can bank their aircraft with little worry of the null being exposed.
UBAD Mimic-X mini
Output power: Pitmode (≤5mw/25mW/50mW/200mW)
Input voltage: 3.2-5.5V
5V camera supply, 270mA(MAX)---200mW
5V camera supply, 213mA(MAX)---50mW
5V camera supply, 190mA(MAX)---25mW
Video system: NTSC/PAL
Frequency: 5.8GHz 6 bands 43 channels
Mounting holes are 16mm on center. However, the holes may be cut out to allow for a different size spacing. Full size mounting can utilize one hole.
- Short-press (1 Seconds) to change channel, digital display will change. Digital display changes from 1 to 8.
- Medium-press (4-5 Seconds) to change the frequency band. Digital display changes cyclically from A, B, E, F, R, H.
- Long-press (8-10 Seconds) until green LED changes position. No Green LED - Pit Mode, first Green LED, 25mw, Middle Green LED 50mw, third green LED 200mw.
What's in the Box:
1 X MiMiC-X mini video transmitter
1 X Sticker
Posted by Jeff on Apr 1st 2018
Very small, easy to use, and great video!
Posted by Nicholas Cordes on Mar 29th 2018
Very small with a mmcx connector! Does exactly what i need it to do. The only down side is the reversed power output leads but i didnt need them as my cam is being powered directly from my fc.
A winning combination that weighs next to nothing!
Posted by Rusty on Mar 14th 2018
I use this combo on a Nano Goblin due to needing a lightweight setup. Holy moly this thing works well! I've been out to over 2 miles with clear video. I need to get a better radio system so I can stretch this thing's legs. Highly recommend, was a super easy install.